skunk
Aug 6, 01:36 PM
Gorgeous, and wearing nothing but a Mona Lisa smile... :)
damnyooneek
Apr 18, 01:36 PM
use a lightly damp paper towel. then wipe it with a dry paper towel. thats all you need.
Weaselboy
May 2, 10:17 AM
http://applejack.sourceforge.net/
iRach
May 2, 06:55 AM
I have a white iPhone4, I have no issues with the sensor or drop of signal at all :)
I was waiting on the 5 but have always wanted a white iPhone, my 3GS is black and so far I'm very pleased indeed :D
I was waiting on the 5 but have always wanted a white iPhone, my 3GS is black and so far I'm very pleased indeed :D
more...
MacHamster68
May 24, 10:34 AM
WOW! that is a hell of a price. I thought �700 for mine with an upgrade was tasty!
tasty yes ,but for me it was worth every pence to get one in pristine condition with not a single sign of wear
tasty yes ,but for me it was worth every pence to get one in pristine condition with not a single sign of wear
rhett7660
Apr 15, 12:13 AM
This one has better sound effects:
http://www.youtube.com/watch?v=5vyBKWGsisY
Haha. Classic.
http://www.youtube.com/watch?v=5vyBKWGsisY
Haha. Classic.
more...
torndownunit
Feb 3, 07:07 PM
Thanks a ton!
Inhale420
Oct 27, 12:44 PM
Originally posted by scem0
30 inches ?!?!?! My god. Nobody would buy that. Not because it isn't cool, but because it would be too expensive. That would be a bad move for apple.
not only that, but there is a limit to where bigger is NOT better. a 30 inch screen placed 2 feet in front of you doesn't seem to make much sense.
30 inches ?!?!?! My god. Nobody would buy that. Not because it isn't cool, but because it would be too expensive. That would be a bad move for apple.
not only that, but there is a limit to where bigger is NOT better. a 30 inch screen placed 2 feet in front of you doesn't seem to make much sense.
more...
nanofrog
Apr 24, 09:32 PM
So I'm a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
It all depends on the details of how you use the system (RAID is supposed to be configured to the specific usage, so there's no "one size fits all", though for narrowed usage patterns, you will see similarities).
I'd advise you to search out previous RAID threads (there's quite a few), and pay attention to the various questions asked, and get back to us with some answers). I'd also recommend you review Wiki's RAID page (http://en.wikipedia.org/wiki/RAID) (pay particular attention to the different levels).
If you're a paid professional, using a stripe set (RAID 0) is a disaster waiting to happen. Even with a backup, you'll spend a fair bit of time to perform a recovery when a disk dies (matter of when, not if), and this also means re-performing work that was done between the most recent backup and when the array failed (beyond replacing the bad disk and restoring all the backup files, which presumably <worst case>, will be multiples to return all the data you have from your backup media).
Glad to see you at least have some sort of backup with your current configuration. :)
Now if you go with a RAID card, you'll need to use enterprise grade drives for stability reasons (different recovery timings in the firmware than consumer models, which tend to be unstable as a result). Unfortunately, they're not as cheap (in fact, can be 2x as expensive as their consumer counterparts for the latest capacity).
Consumer disks are fine for backup purposes though, and this can save you a considerable amount of funds, particularly if your capacity requirements are high (i.e. eSATA card + Port Multiplier based external enclosure; example kit (http://www.newegg.com/Product/Product.aspx?Item=N82E16816111136&cm_re=tr4mp-_-16-111-136-_-Product)).
There are some inexpensive products that claim RAID 5, but be careful. Some are software based, which should never be used for this level (no solution to the "write hole issue" associated with parity based arrays). Others use very inexpensive hardware RAID controllers (aka RoC = RAID on a Chip). They're slow for primary usage, and is why they're cheap (compromise on performance vs. proper RAID cards).
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
This can get complicated on the software end though, and not recommended for those that aren't comfortable with the additional complexity (patches for OS X or via VM), particularly for a DAS system (has more merit with NAS or SAN IMO).
So I'd stick with a 3rd party hardware RAID card, assuming this is actually needed, enterprise disks and any enclosures/mounting hardware necessary. Much simpler in terms of software (install the drivers, and any interface software that's required to access the card settings), and the hardware aspect isn't that difficult either.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
Most cards don't deal with consumer grade disks very well (ATTO and Area definitely don't).
But consumer disks are fine for backup purposed (i.e via eSATA and PM enclosures) due to the lower duty cycle (where you can cut costs effectively, and not endanger the data).
or Just RAID5 with 3x HDD's and partition the RAID volume.
I wouldn't do this if both partitions are to be used simultaneously (i.e. primary data one one partition, scratch data on the other).
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
Those are the best recommendations as far as brand and series per. As to a specific model, it will depend on the specifics, particularly for growth (i.e 8 ports may be outgrown in under 3 years, so getting a card with sufficient ports to last that long would be cheaper in the long run - just add disks and enclosures as necessary).
Sorry should have been more clear (like I said I'm dumb) I have a 500GB Boot drive that lives independently from the (3) 1TB drives RAIDED together via the OS.
A separate boot disk is advisable, as you still have a working OS if the array goes down (allows you to access the card, use the browser to search for help, or deal with Support from the card manufacturer if needed).
And ALL data (3.5TB's) is backed up by an external 4TB Time Machine RAID (2 drives @ 2TB each)...which is connected via 2 eSATA cables via the eSATA PCI Card I bought from OWC...which I guess is actually RAIDed by the OS as well.
That backup solution is a RAID 0. The overall backup solution will almost certainly need to change in order to be sufficient for the primary storage pool you'll end up with.
Not sure what you are looking at, since 3 drives is sort of an odd combination. I have a 2009/2010 Mac Pro Nehalem, running the apple sas card for the 4 internal bays (yes I know they make adapters to use 3rd party cards), and the performance is fair, not great but fair. About 300Mb/s read/write with 4 WD Black edition drives (1tb each). Externally, running an Areca 1680x card, with a 8 drive ProAvio chassis, 8 SAS Seagate 15k7 drives (450GB) which gives close to 900MB/s. I have tried multiple cards over the years, nano and I have exchanged lots of posts/messages. Email/PM me with specific questions and I will try and help you. Beware of most of these 3rd party slot adapters/etc. they are more hassle than they are worth.
I've not heard or seen any issues with the MaxUpgrades kit.
As per Apple's card, I'm no fan of it, particularly due to the cost/performance ratio.
BTW, the OP only has 2 posts at the time of writting this, so returning a PM isn't possible yet (needs to have 5 posts IIRC). email would work if you have that enabled.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
It all depends on the details of how you use the system (RAID is supposed to be configured to the specific usage, so there's no "one size fits all", though for narrowed usage patterns, you will see similarities).
I'd advise you to search out previous RAID threads (there's quite a few), and pay attention to the various questions asked, and get back to us with some answers). I'd also recommend you review Wiki's RAID page (http://en.wikipedia.org/wiki/RAID) (pay particular attention to the different levels).
If you're a paid professional, using a stripe set (RAID 0) is a disaster waiting to happen. Even with a backup, you'll spend a fair bit of time to perform a recovery when a disk dies (matter of when, not if), and this also means re-performing work that was done between the most recent backup and when the array failed (beyond replacing the bad disk and restoring all the backup files, which presumably <worst case>, will be multiples to return all the data you have from your backup media).
Glad to see you at least have some sort of backup with your current configuration. :)
Now if you go with a RAID card, you'll need to use enterprise grade drives for stability reasons (different recovery timings in the firmware than consumer models, which tend to be unstable as a result). Unfortunately, they're not as cheap (in fact, can be 2x as expensive as their consumer counterparts for the latest capacity).
Consumer disks are fine for backup purposes though, and this can save you a considerable amount of funds, particularly if your capacity requirements are high (i.e. eSATA card + Port Multiplier based external enclosure; example kit (http://www.newegg.com/Product/Product.aspx?Item=N82E16816111136&cm_re=tr4mp-_-16-111-136-_-Product)).
There are some inexpensive products that claim RAID 5, but be careful. Some are software based, which should never be used for this level (no solution to the "write hole issue" associated with parity based arrays). Others use very inexpensive hardware RAID controllers (aka RoC = RAID on a Chip). They're slow for primary usage, and is why they're cheap (compromise on performance vs. proper RAID cards).
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
This can get complicated on the software end though, and not recommended for those that aren't comfortable with the additional complexity (patches for OS X or via VM), particularly for a DAS system (has more merit with NAS or SAN IMO).
So I'd stick with a 3rd party hardware RAID card, assuming this is actually needed, enterprise disks and any enclosures/mounting hardware necessary. Much simpler in terms of software (install the drivers, and any interface software that's required to access the card settings), and the hardware aspect isn't that difficult either.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
Most cards don't deal with consumer grade disks very well (ATTO and Area definitely don't).
But consumer disks are fine for backup purposed (i.e via eSATA and PM enclosures) due to the lower duty cycle (where you can cut costs effectively, and not endanger the data).
or Just RAID5 with 3x HDD's and partition the RAID volume.
I wouldn't do this if both partitions are to be used simultaneously (i.e. primary data one one partition, scratch data on the other).
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
Those are the best recommendations as far as brand and series per. As to a specific model, it will depend on the specifics, particularly for growth (i.e 8 ports may be outgrown in under 3 years, so getting a card with sufficient ports to last that long would be cheaper in the long run - just add disks and enclosures as necessary).
Sorry should have been more clear (like I said I'm dumb) I have a 500GB Boot drive that lives independently from the (3) 1TB drives RAIDED together via the OS.
A separate boot disk is advisable, as you still have a working OS if the array goes down (allows you to access the card, use the browser to search for help, or deal with Support from the card manufacturer if needed).
And ALL data (3.5TB's) is backed up by an external 4TB Time Machine RAID (2 drives @ 2TB each)...which is connected via 2 eSATA cables via the eSATA PCI Card I bought from OWC...which I guess is actually RAIDed by the OS as well.
That backup solution is a RAID 0. The overall backup solution will almost certainly need to change in order to be sufficient for the primary storage pool you'll end up with.
Not sure what you are looking at, since 3 drives is sort of an odd combination. I have a 2009/2010 Mac Pro Nehalem, running the apple sas card for the 4 internal bays (yes I know they make adapters to use 3rd party cards), and the performance is fair, not great but fair. About 300Mb/s read/write with 4 WD Black edition drives (1tb each). Externally, running an Areca 1680x card, with a 8 drive ProAvio chassis, 8 SAS Seagate 15k7 drives (450GB) which gives close to 900MB/s. I have tried multiple cards over the years, nano and I have exchanged lots of posts/messages. Email/PM me with specific questions and I will try and help you. Beware of most of these 3rd party slot adapters/etc. they are more hassle than they are worth.
I've not heard or seen any issues with the MaxUpgrades kit.
As per Apple's card, I'm no fan of it, particularly due to the cost/performance ratio.
BTW, the OP only has 2 posts at the time of writting this, so returning a PM isn't possible yet (needs to have 5 posts IIRC). email would work if you have that enabled.
4JNA
Apr 10, 07:36 PM
i've got one for you, but mine is version '9.0.4' instead of '9.2.2' like the link above. also have the matching 'Software Restore' disc, and an 'iMac Applications' disc also stamped but looks to be later as it's a lighter shade of gray. i know that i used the disc to install 9.0.4 on a b&w g3, so this should work for you.
i've no use for them, if you want them, pm you mailing address and i'll slap a couple stamps on them and send them on. best of luck with the restore project.
i've no use for them, if you want them, pm you mailing address and i'll slap a couple stamps on them and send them on. best of luck with the restore project.
more...
Peter.Howard
Nov 13, 09:11 PM
you get the ? disk icon when holding down shift key?
but without shift key it boots normally?
you may want to let it get to the happy mac icon, then hold down shift
but without shift key it boots normally?
you may want to let it get to the happy mac icon, then hold down shift
Freakk123
May 4, 07:13 PM
Good luck! With the right ideas, usibility and topics (like macrumors), people are bound to join and the site will be great. Also, IMHO the layout is very attractive! I joined with the same username (freakk123) as here.
more...
Josh
Dec 9, 11:00 AM
I second the heater function. The only problem I have is it takes some time to warm up. Yeah...that's in the room I SLEEP in.
http://forums.macrumors.com/attachment.php?attachmentid=35481&d=1132930895
101.5 degrees F is nothing...My last p4 idled at around 127 degrees :p
http://forums.macrumors.com/attachment.php?attachmentid=35481&d=1132930895
101.5 degrees F is nothing...My last p4 idled at around 127 degrees :p
JSage
Mar 17, 07:56 PM
I think it'll depend on the weather for me.
If it's mild enough, then an all-nighter would be pretty good epic for my first time queuing for a launch :D
I'm definitely going to be there by 5am though. Most likely in a white hoody and trying to keep warm.
If it's mild enough, then an all-nighter would be pretty good epic for my first time queuing for a launch :D
I'm definitely going to be there by 5am though. Most likely in a white hoody and trying to keep warm.
more...
SciFrog
Nov 19, 05:30 PM
They need to recode for OpenCL, anywhere from 6 months to several years...
Multimedia
Oct 23, 04:17 PM
I'll be the guy with the HDV camera near the front of the line. :)
more...
MacFan26
Sep 16, 03:00 AM
Under "Servers"... "Sorry. There are no top sellers available in Servers." :D
:D I'm sure the Xserve will be on there any day now!
:D I'm sure the Xserve will be on there any day now!
JSRockit
Sep 8, 06:55 PM
I hope they are wrong. It is really sad. Apple just keeps falling behind more and more.
MacRumorUser
Mar 20, 10:50 AM
Well as I have already signed up for a PSN Euro account I've been trying to login daily, but it cambe back as - not ready to launch in your territory. Well just tried it and yep.. Euro PSN is live.
The Euro Playsation store is 'CHEAPER' than the USA store.
Tekken Dark Resurection is $19.99 but on the Euro site its �9.99 ($13.50)
Lemmings �4.99
BlastFactor �4.99
GripShift �7.99
---------
The Euro Playsation store is 'CHEAPER' than the USA store.
Tekken Dark Resurection is $19.99 but on the Euro site its �9.99 ($13.50)
Lemmings �4.99
BlastFactor �4.99
GripShift �7.99
---------
GFLPraxis
Mar 16, 02:07 PM
I'm thinking of buying some stock in nuclear.
threeputt
Mar 27, 09:51 AM
So how did everybody make out yesterday?
Any tips on finding an iPad 2 in Ottawa at this point? Should I wait a while before even bothering to look for one in stores?
I managed to get a white 64 GB WiFi model at the Ottawa Apple store yesterday at around 0930, just after they opened. Only waited about 20 minutes and they seemed to have lots of stock.
Any tips on finding an iPad 2 in Ottawa at this point? Should I wait a while before even bothering to look for one in stores?
I managed to get a white 64 GB WiFi model at the Ottawa Apple store yesterday at around 0930, just after they opened. Only waited about 20 minutes and they seemed to have lots of stock.
macquariumguy
Jul 19, 03:50 PM
I didn't know the Nazis had an oldtimers day.
SideStepSociety
Apr 27, 08:41 PM
Ahh, yeah, that sucks. Hopefully the JB comes sooner than later. I've almost been considering an iPad, but I'm just not sure I'd make enough use of it to warrant the price.
Edit: Killer! Thanks lavirshevo! They look great! They look even better in my multitasking bar! :)
Thanks to Hackint0sh814 as well! Loving the new rotation lock switch on my iPhone.
Edit: Killer! Thanks lavirshevo! They look great! They look even better in my multitasking bar! :)
Thanks to Hackint0sh814 as well! Loving the new rotation lock switch on my iPhone.
sushi
Jul 7, 10:18 PM
You either loved or hated the puck. If it was clean, it felt great to use. I still have them and use one on the blueberry iMac I have in the garage. I personally liked it a lot.
Same here.
Liked the puck mouse. :)
Same here.
Liked the puck mouse. :)
0 comments:
Post a Comment