Moyank24
Mar 1, 08:13 PM
Congress appears to disagree with the President
You mean, the Republicans appear to disagree with the President.
Shocker.
And as a previous poster said, they are wrong. I'd love to know the marital status' of all of those supporting the DOMA. I wonder how many divorces they have between them.
You mean, the Republicans appear to disagree with the President.
Shocker.
And as a previous poster said, they are wrong. I'd love to know the marital status' of all of those supporting the DOMA. I wonder how many divorces they have between them.
Daveman Deluxe
Jul 9, 10:13 PM
Actually, a lot of companies are moving tech support and other back-office operations to India. A lot of the Indian techs will watch Friends and other American shows so they can keep a conversation up if a caller is chatty. They even make up fictitious lives in case somebody asks about their personal life.
It's actually not that different from when a lot of back-office operations were in Ireland.
It's actually not that different from when a lot of back-office operations were in Ireland.
Xavier
Aug 8, 09:03 PM
I like the "wooden" looking ones
h0e0h
Feb 8, 06:41 PM
There's a new mx1000?
Maybe my post was a little misleading... i meant Logitech's newest input device the mx1000... my bad... and also i'd like to see some pics or something w/ the new FCP Keyboard in them... and to hear about how it is...
Maybe my post was a little misleading... i meant Logitech's newest input device the mx1000... my bad... and also i'd like to see some pics or something w/ the new FCP Keyboard in them... and to hear about how it is...
more...
SchneiderMan
Sep 14, 07:15 PM
Thanks for the answers......But should I pull that lump off its back with a needle nose pliers? eww:eek:
Hammer it.
Hammer it.
thomwilk
Mar 24, 11:44 AM
Rideau Centre Apple Store for me. Anybody want to meet up?
Sure, I'll meet you. When are you going?
Sure, I'll meet you. When are you going?
more...
elders
May 3, 02:18 AM
so just update to 4.3 using firmware from felixbruns?
jhatz
Apr 18, 11:17 AM
I would try a Mr. Clean Magic eraser on a small spot on the bottom to see how it cleans. It should work well. I used it on my old black MacBook and it made it look like new again. Don't use it on the LCD however. Get Monster LCD cleaning solution (it comes in a blue bottle for like $20). It's well worth it, the consistency of the liquid is a gel type spray so it won't ever run even if you spray directly onto the screen panel itself.
Back to the magic eraser, it removes pesky oily spots that appear to look like wear on the keys/hand rests/track pad. I haven't found any way to officially clean my macbook until I used them.
Back to the magic eraser, it removes pesky oily spots that appear to look like wear on the keys/hand rests/track pad. I haven't found any way to officially clean my macbook until I used them.
more...
el greenerino
Dec 20, 05:59 AM
You could probably take what you need scanned to a service bereau, they'd probably do a better job than anything the average home user would. Just make sure they're reputable and use equipment that's better han what they use at walgreens :p
w8ing4intelmacs
Feb 29, 04:46 PM
i'll take the flawed one. im sending money now
more...
KittenKrusher
Sep 21, 12:22 AM
I was looking to get the Sony DSC-W7 camera mainly because my friend has the 5 MP version and I find it very nice, with its large screen and all. I can the the W7 for about $340 which I think is a good price.
My question is can anyone recommend a better camera in the 7 MP range that might be a better camera? The most I would spend is $400. and should I get a camera that can support RAW images, because this W7 one does JPG and not RAW.
My question is can anyone recommend a better camera in the 7 MP range that might be a better camera? The most I would spend is $400. and should I get a camera that can support RAW images, because this W7 one does JPG and not RAW.
munkery
May 6, 01:06 AM
MacSecurity is a variant of MacDefender.
http://blog.intego.com/2011/05/02/macdefender-rogue-anti-malware-program-attacks-macs-via-seo-poisoning/
http://blog.intego.com/2011/05/02/intego-security-memo-macdefender-fake-antivirus/
You should also be aware of the Weyland-Yutani Bot.
http://m.krebsonsecurity.com/2011/05/weyland-yutani-crime-kit-targets-macs-for-bots/
http://blog.intego.com/2011/05/02/macdefender-rogue-anti-malware-program-attacks-macs-via-seo-poisoning/
http://blog.intego.com/2011/05/02/intego-security-memo-macdefender-fake-antivirus/
You should also be aware of the Weyland-Yutani Bot.
http://m.krebsonsecurity.com/2011/05/weyland-yutani-crime-kit-targets-macs-for-bots/
more...
Love
Apr 9, 07:10 PM
I liked PowerBookMedic - dealt with them a few times, pricey but good.
($3 or something for a MacBook key)
($3 or something for a MacBook key)
harcosparky
May 5, 04:56 AM
I'd venture to say that people have done more work with less computer then that, so you should be fine with what you want to do.
System RAM is important as previously stated.
System RAM is important as previously stated.
more...
2nyRiggz
Apr 1, 12:15 PM
Where do I sign up...got me all excited in stuffs.
Bless
Bless
wickedG35
Jul 10, 03:17 PM
Sold!
more...
chrismacguy
Apr 28, 04:48 AM
Hi. I'm wondering if mixing and matching even Apple production apps affects their compatibility? Moving "up" to a Mac has been a bubble-buster since I discovered the dark side of legacy software and machines in an "upgraded to Intel" world.:mad:
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
Right, well FCP 5 and Compressor 2 were shipped together AFAIK (My copy of STP 1, which was part of the same suite and shipped at the same time came with Compressor 2). iDVD and DVD Studio Pro are different products - again DVD Studio Pro 3 shipped with FCP 5 and Compressor 2 (DVD SP4 ships with FCP6/7 and Compressor 3/3.5) - Logic Studio should have no impact except instead of Soundtrack Pro 1, you should have Soundtrack Pro 2, which should still work "fine" - and iDVD 7.0.4 implies you have iLife installed, which shouldnt impact the pro Apps at all :) If you want to reinstall Compressor, you need Compressor 2 (I dont think Compressor comes with Logic Studio, but since Ive had both for so long Im not entirely sure), but the wares you have do all fit together (Final Cut Studio 1/Production Box, Logic Studio 8 and iLife).
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
Right, well FCP 5 and Compressor 2 were shipped together AFAIK (My copy of STP 1, which was part of the same suite and shipped at the same time came with Compressor 2). iDVD and DVD Studio Pro are different products - again DVD Studio Pro 3 shipped with FCP 5 and Compressor 2 (DVD SP4 ships with FCP6/7 and Compressor 3/3.5) - Logic Studio should have no impact except instead of Soundtrack Pro 1, you should have Soundtrack Pro 2, which should still work "fine" - and iDVD 7.0.4 implies you have iLife installed, which shouldnt impact the pro Apps at all :) If you want to reinstall Compressor, you need Compressor 2 (I dont think Compressor comes with Logic Studio, but since Ive had both for so long Im not entirely sure), but the wares you have do all fit together (Final Cut Studio 1/Production Box, Logic Studio 8 and iLife).
brn2ski00
Jun 24, 01:24 PM
hey i had said i wanted those but its fine, u can sell them to the other guy
PM Sent.
PM Sent.
MrFusion
Apr 24, 12:28 PM
byteSizeOfElement is wrong. Your code will only work (if all other bugs are fixed) with 64 bit code, not with 32 bit code.
Care to explain why? :confused:
Having little faith in the user (mainly me) to actually release the pointer, I already decided to get the value by passing a reference.
-(void) element:(void *) element
Care to explain why? :confused:
Having little faith in the user (mainly me) to actually release the pointer, I already decided to get the value by passing a reference.
-(void) element:(void *) element
Mr. Anderson
Jul 23, 10:06 AM
all the forums were shut down for an hour or two, so it might not have been a mistake, it might have been for everybody.
Mr. Anderson
Sep 21, 12:16 AM
Ah, yeah, that's what I meant - thanks for the back up ed!
:D
D
:D
D
Capt Underpants
Apr 6, 09:52 PM
Apple
Brita (filtered pitchers)
Nalgene (water bottles)
Levi's
Chipotle
Chicken Express (sweet tea)
Brita (filtered pitchers)
Nalgene (water bottles)
Levi's
Chipotle
Chicken Express (sweet tea)
imaketouchtheme
May 5, 10:25 PM
Also, bumping your own thread is against forum rules.
The solution to your problem lies within my post.
The solution to your problem lies within my post.
alphadog111
Apr 16, 04:55 PM
The stuff used on the heatsink is NOT an adhesive. It is just a compound that maximises the heat transfers between CPU and heatsink. The heatsink MUST be held down with the screws.
From the looks of it, you've either got a damaged bottom case (screw mount knocked off) or a bottom case for the wrong model (slightly different fittings).
Is the missing screws and the compound thats causing the "error restart message" when i load the desktop? How do I get the compound to reattach it on the CPU?
From the looks of it, you've either got a damaged bottom case (screw mount knocked off) or a bottom case for the wrong model (slightly different fittings).
Is the missing screws and the compound thats causing the "error restart message" when i load the desktop? How do I get the compound to reattach it on the CPU?
0 comments:
Post a Comment