rx7dude
Apr 25, 10:38 PM
Thanks for the input.
So rmtoberman, what you're saying is you can get about 4 hours of playback after recording for an hour?
Does it come with an SD card then? I can't really tell from the Amazon listing.
Tried it in low light situations at all?
It did not come with an SD Card.
Low light is a little grainy....
So rmtoberman, what you're saying is you can get about 4 hours of playback after recording for an hour?
Does it come with an SD card then? I can't really tell from the Amazon listing.
Tried it in low light situations at all?
It did not come with an SD Card.
Low light is a little grainy....
zedsdead
Mar 20, 08:19 PM
Doubt screen size has anything to do with it - I'm running three displays off my Mini without any lag (2 at 1920x1080 aka 1080p and one at 1920x1200).
Do you have the Mac Mini plugged into a port labeled HDMI/DVI that is perhaps handled differently by the TV? I'm thinking image processing on the TV might be the cause of the lag, but I'm not 100% sure.
I don't have one yet, which is why I was asking...lol...glad to hear it works great though.
Do you have the Mac Mini plugged into a port labeled HDMI/DVI that is perhaps handled differently by the TV? I'm thinking image processing on the TV might be the cause of the lag, but I'm not 100% sure.
I don't have one yet, which is why I was asking...lol...glad to hear it works great though.
mif
Apr 13, 10:07 AM
Is there any way to silence once and for all a Blu-Ray burner in Mac Pro (No disk inside). I have tried two different units, one from LG and another from HP. They sometimes began to emit annoying sound, as in old western movies (night scenes), if you know what i mean.
Is it some kind of oscillation or what?
Is it some kind of oscillation or what?
musique
Apr 4, 06:48 AM
"Plays nicely with the MAC" doesn't give a lot of information about what you're planning to use to edit on the Mac.
In general, however, most cameras shoot video that is made for playback, not editing. So, if you're planning to use FCP to edit, FCP can import many different formats and convert them to formats made for editing. In addition, there are free and not-free programs that can assist in converting your camera format to an editing format.
If you can provide more information about your needs, you'll probably get more informative responses.
Good luck.
In general, however, most cameras shoot video that is made for playback, not editing. So, if you're planning to use FCP to edit, FCP can import many different formats and convert them to formats made for editing. In addition, there are free and not-free programs that can assist in converting your camera format to an editing format.
If you can provide more information about your needs, you'll probably get more informative responses.
Good luck.
more...
will0407
Apr 30, 03:57 PM
I think I'm going to take it in and see if they'll switch it. Only problem is taking my palmguard off and whther it will reapply as well. I got it on perfectly as well on this one! It has warranty until November so I may leave it for a bit or wait until I have a little more time available.
Maybe if they see that i clearly cherish this little thing they may feel more inclined to help me out
Maybe if they see that i clearly cherish this little thing they may feel more inclined to help me out
torbjoern
Feb 20, 05:05 PM
Apple is Apple. Nothing from Apple is cheap.
more...
alphaod
Jun 10, 10:51 AM
When Apple changed their name from Apple Computer to just Apple it was when they cared more about iPods and iPhones than the computer.
Hellhammer
Mar 16, 12:16 PM
I would install it in the HD. It's not that buggy but I wouldn't keep it as my only OS.
more...
Don't panic
Jul 13, 10:33 AM
We had at least 2 or 3 topic with this car in the past few months.
Use the search function.
Still, cool car/mac.
Come on, give him a brake.
It'd true that this has appeared before (http://forums.macrumors.com/showthread.php?t=57422), but it was months ago and the search function *cough* doesntreallyworkverywell *cough*
and it WAS a cool mod
Use the search function.
Still, cool car/mac.
Come on, give him a brake.
It'd true that this has appeared before (http://forums.macrumors.com/showthread.php?t=57422), but it was months ago and the search function *cough* doesntreallyworkverywell *cough*
and it WAS a cool mod
furryrabidbunny
Sep 12, 06:41 PM
ok... it takes 184 pin DDR266, PC2100. i have a friend with a 128 stick of 184 pin PC3200 (my memory didn't work). Would her's work? i figure the computer would just clock it down
more...
calb818
Mar 19, 11:56 AM
Hello again all,
I have started to progress in my Apple education, and I have hit the first hurdle.
I have got my hands on a Dual 1.8Ghz G5, the last owner obviously removed the HDD and the RAM and Graphics card, so I thought this should be easy enough to resolve.
New 320gb HDD, 2 partitions, partition 1 100gb partition 2 200gb, ati radeon 9800 pro mac special edition graphics card, and to start with 1gb of RAM.
I did think it would be a case of install all the bits of kit needed, start machine, load OS X and off I go.
Not the case, when I press the power button the front LED flashes, the fans come on, the hard drive sounds as if it is powering up, but I have no power or activity from the keyboard and mouse, the video card also powers up as the fans on it are running. No activity on the monitor screen.
I have done a PRAM reset by pressing the button, I have changed the battery.
All I get in simple terms is a box that power up with a flashing LED and no other activity?? I also get no BEEPS on power up!!!!!!!
What I have also done is I thought fine I used my G4 Quicksilver with a USB dock and I loaded my new OS X 10.5 Leopard onto the new hard drive, that was successful, I put it back into the G5 still no joy. Could the Logic board or the CPU's be U/S? I have also now taken the CPU's out, and I have tried using just one to see if they are U/S, it does not make a difference.
Does anyone have any advice on how to start a G5 that you have rebuilt?? I thought if I put the relevant parts together as I have done many times in the past with normal PC's, it should just be simple??
I have started to progress in my Apple education, and I have hit the first hurdle.
I have got my hands on a Dual 1.8Ghz G5, the last owner obviously removed the HDD and the RAM and Graphics card, so I thought this should be easy enough to resolve.
New 320gb HDD, 2 partitions, partition 1 100gb partition 2 200gb, ati radeon 9800 pro mac special edition graphics card, and to start with 1gb of RAM.
I did think it would be a case of install all the bits of kit needed, start machine, load OS X and off I go.
Not the case, when I press the power button the front LED flashes, the fans come on, the hard drive sounds as if it is powering up, but I have no power or activity from the keyboard and mouse, the video card also powers up as the fans on it are running. No activity on the monitor screen.
I have done a PRAM reset by pressing the button, I have changed the battery.
All I get in simple terms is a box that power up with a flashing LED and no other activity?? I also get no BEEPS on power up!!!!!!!
What I have also done is I thought fine I used my G4 Quicksilver with a USB dock and I loaded my new OS X 10.5 Leopard onto the new hard drive, that was successful, I put it back into the G5 still no joy. Could the Logic board or the CPU's be U/S? I have also now taken the CPU's out, and I have tried using just one to see if they are U/S, it does not make a difference.
Does anyone have any advice on how to start a G5 that you have rebuilt?? I thought if I put the relevant parts together as I have done many times in the past with normal PC's, it should just be simple??
e�Studios
Dec 5, 04:48 PM
There is no way to change the graphics chip on ANY iMac. They are all soldered to the logic board.
More RAM + faster harddrive is about all you can do.
I specifically remember them saying they replaced the graphics card on my DV SE G3 500 iMac when i had it repaired under warranty years ago, now if that means it can be upgraded i doubt it, but from the way it sounded was like it was a seperate card and not part of the logic board.
Ed
More RAM + faster harddrive is about all you can do.
I specifically remember them saying they replaced the graphics card on my DV SE G3 500 iMac when i had it repaired under warranty years ago, now if that means it can be upgraded i doubt it, but from the way it sounded was like it was a seperate card and not part of the logic board.
Ed
more...
jondob
May 5, 03:22 PM
bump
iLucas
Apr 14, 12:28 PM
Yours look fine.
Well that's good to know,
But now i'm not sure what other problem my iMac could have.
Any one have any clues?
Well that's good to know,
But now i'm not sure what other problem my iMac could have.
Any one have any clues?
more...
powerbook911
Sep 19, 06:05 PM
It is an excellent display. I just find that they still go for so much money that one could almost buy a 20-inch cinema.
SolidSnake
Dec 17, 03:24 PM
i'm glad i don't' like myspace.
more...
MrMacMan
Oct 15, 10:04 PM
yeah Cleo was fun... ah well.
cantthinkofone
Mar 16, 09:01 PM
Infraction<Misdemeanor<Felony
tsvb
Sep 12, 12:56 PM
Hey kntgsp where's the dock and manual? Correct me if I'm wrong but don't these things come with that stuff? Oh, and you never got back to me about whether you had a receipt or not. Thanks in advance.
There is no manual that comes with the iPhone, the dock on the other hand...
There is no manual that comes with the iPhone, the dock on the other hand...
pseudobrit
Mar 26, 10:46 PM
1700 points per WU!!! :eek: That's more then my weekly production! And I have two C2D and a G5 folding. Not 24/7, but still... It has taken me 5 years to get to the 170.000 points and over 2000 WU to achieve that. That makes you think, 2000 WU X 1700 points = 3.400.000 points! That's about 20 times as high. Those PS3 are seriously kicking some @#$*!!
There were only two or three simulations worth 1700 points and they're not PS3 WUs. A C2D can handle one of the big mothers in a little over a day. The PS3 is currenlty chomping on some ~300 pt WUs that take between 6-8 hours to wrap up.
There were only two or three simulations worth 1700 points and they're not PS3 WUs. A C2D can handle one of the big mothers in a little over a day. The PS3 is currenlty chomping on some ~300 pt WUs that take between 6-8 hours to wrap up.
iRach
May 5, 04:55 PM
Your probably right. I think I'll get the white one.
I had the same dilemma, was going to wait for the 5, 'till the white one came out...:D
I had the same dilemma, was going to wait for the 5, 'till the white one came out...:D
jacobson00
May 6, 03:41 PM
ok fine sorry it ticked you off, but it was an innocent question. :(:(:(:(:(:(
maybe they should Post that discussion
maybe they should Post that discussion
jettredmont
Mar 17, 12:25 AM
the more the better!
eagerly awaiting Aperture 3.1 to speed a few things up and please add pinch zoom for the MBP users, even Lightroom has pinch zoom.
I'm happy with the new Aperture but these tiny little things can be improved.
There is pinch zoom in the browser view and while working with Faces, just not while editing a picture.
IMHO, pinch zoom gets in my way more often than not. I find myself accidentally triggering it while dragging a selection in Faces or the browser. I strongly prefer more intentional control over something like that in a pro photo package ...
That having been said, it would be nice to be an option.
eagerly awaiting Aperture 3.1 to speed a few things up and please add pinch zoom for the MBP users, even Lightroom has pinch zoom.
I'm happy with the new Aperture but these tiny little things can be improved.
There is pinch zoom in the browser view and while working with Faces, just not while editing a picture.
IMHO, pinch zoom gets in my way more often than not. I find myself accidentally triggering it while dragging a selection in Faces or the browser. I strongly prefer more intentional control over something like that in a pro photo package ...
That having been said, it would be nice to be an option.
Matty-p
Apr 11, 01:29 PM
Hi,
I have two internet connections here, one via GBit-Ethernet to my Mac Mini and a slower one connected to my WiFi router. I just bought a wireless printer, thus I need to connect the Mini to the WiFi to print.
I think this is not explicitly specified, but which connection will be used to route to the internet? It would be unfortunate to use the WiFi, as it's about 5 times slower.
Can I set the wired connection to be default for all connections, and route only the traffic that really has to go into the WiFi? All that comes to mind at the moment is removing the gateway/router address.
Better ideas?
i take it your taking static routes you could bond them together but thats hard and kinda pointlesss id get rid of the dsl conection stick the gige line into the router bridge that to wifi and wire in the pc/mac to the same router done
I have two internet connections here, one via GBit-Ethernet to my Mac Mini and a slower one connected to my WiFi router. I just bought a wireless printer, thus I need to connect the Mini to the WiFi to print.
I think this is not explicitly specified, but which connection will be used to route to the internet? It would be unfortunate to use the WiFi, as it's about 5 times slower.
Can I set the wired connection to be default for all connections, and route only the traffic that really has to go into the WiFi? All that comes to mind at the moment is removing the gateway/router address.
Better ideas?
i take it your taking static routes you could bond them together but thats hard and kinda pointlesss id get rid of the dsl conection stick the gige line into the router bridge that to wifi and wire in the pc/mac to the same router done
0 comments:
Post a Comment